Skip to content
Roughneck Drones, home
spray family

Roughneck Spray Series

Heavy-lift liquid application platforms.

Heavy-lift multirotor platforms designed around liquid application missions: tank, pump, plumbing and nozzle hardware integrated with the airframe from the start.

Concept line illustration of a heavy-lift spray multirotorRTK GNSSPROPULSIONCARBON AIRFRAMELIQUID TANKSPRAY BOOMNOZZLE ARRAY

Concept illustration — not a photograph of a production aircraft.

Product overview

Overview

The Spray Series is being engineered for one job: putting liquid exactly where it needs to go, from the air, on surfaces that are slow, costly or hazardous to reach from the ground.

Rather than bolting a tank under a general-purpose aircraft, the design treats the liquid system as part of the airframe — mass placement, slosh, plumbing routes, pump power and nozzle position all shape the platform.

Note
This platform is in development. Configuration, model designation and availability will be announced when finalized.

Major capabilities

Design objectives

What this platform is being engineered to do. These describe design intent, not verified performance.
01

Integrated liquid system

Tank, pump and plumbing designed with the airframe so mass, centre of gravity and service access are planned, not improvised.

02

Configurable dispensing

Designed to accept a single precision wand or a multi-nozzle boom, depending on the surface and coverage the mission requires.

03

Remote and mission-based control

Dispensing designed to be controlled by the pilot or triggered by the mission plan at defined waypoints and segments.

04

Serviceable in the field

Quick access to pumps, lines and nozzles so crews can flush, inspect and swap parts without a workshop.

Technical specifications

Specifications

Measured, verified values only.

Specifications pending verification.

We publish weight, payload, endurance, environmental and system specifications only after they have been measured in testing. Until then we don't list estimates. If your project depends on specific figures, tell us your requirements and we'll discuss where development stands.

Discuss requirements

Regulatory notes

Commercial operation in the United States is governed by FAA regulations, including 14 CFR Part 107. Aircraft at or above 55 lb takeoff weight, and operations that dispense substances, can require additional FAA authorization. Operators are responsible for confirming current federal, state and local requirements.

Applying pesticides or other regulated products requires compliance with the product label and applicable EPA, state and FAA rules, which may include 14 CFR Part 137.

Integration options

Systems integration

Integration paths under development or evaluation for this platform.
  • RTK GNSS positioning
  • Mission-based spray control
  • Flow and pressure monitoring (planned)
  • Payload status telemetry (planned)
  • Autonomous technology

Downloads

Documents

Specification sheets and brochures for this platform will be published in the resource library once the configuration is released.

Request a quote

Talk to us about the Spray Series.

Tell us about your mission. We'll respond with where development stands and how this platform could fit your operation.

Fields marked with an asterisk are required.

Payload, surface or area, flight time, site conditions — whatever you know so far. Please don't include confidential design information.

Please don't send confidential drawings or specifications through this form.